Pianos for Sale Pristine Condition Steinway Model L Grand Piano

Watch Piano Watch Piano Add To Compare Add To Compare View Comparisons View Comparisons Email a Friend Email a Friend
Purchased new in 1981 by one of America’s most prominent national home builders and philanthropists, has resided in the same location since its original purchase and been meticulously maintained. The home and piano were next owned by Government of Japan for use in the Consul General’s residence in Cherry Hills Village Colorado. The home and piano were again purchased in 2012 by the current owner, a nationally recognized investment banker. The piano has been well cared for and was refurbished in 2018 by Mr. Michael Jackson, former U.S. Master service technician for Steinway & Sons New York.
Rim- Made entirely from hard rock maple and mahogany; laminations; continuous bent, both inner & outer form one single rim; unequaled strength and stability.
Braces - 4 solid spruce; spruce provides tensile strength with less weight. Maple dowels fasten braces to rim producing a single homogenous foundation upon which is built the entire tonal component. The S & S iron wedge anchors brace ends securely to crossblock assuring permanent rim posture.
Pinblock - Hexagrip patented design; 6 laminations of quartered hardrock maple and bubinga stock. Grain symmetrically distributed at successive angles of 45° or 90° employing grain direction uniformly around the circumference of the tuning pin to provide the ultimate in pin grippage. As a result of this exclusive design, the tuning pin has smoother movement under torque, a more uniform retaining action for solid setting, and a piano which will hold its tuning longer.
Soundboard - Created like the soundboard of violins to give a free and even response throughout the entire scale, it is so constructed as to be 9 mm thick in the center and tapered to 6 mm as it approaches the rim and outer case before being DOUBLE CROWNED. This design permits complete freedom of movement, while acting as a homogenous unit to displace a greater amount of air, thereby creating a richer and more lasting tonal response. Close-grained, quarter-sawn Sitka or European spruce, a wood having unusual stability and vibrance under stress and vibration, is used exclusively for the soundboard.
Ribs - Made from Sugar Pine to assure strong and constant support of string down-bearing on the soundboard. Rib ends are hand-fitted into their mounting surfaces virtually locking in the important soundboard crown.
Bridges Treble: Hard rock maple vertical laminations capped with solid hard rock maple; planed to prescribed height, graphite coated, drilled, and notched by hand for precise individual string bearing. Design defies splitting. Bass: Continuous with treble. Maple doweled, glued, and screwed to soundboard.
Scale - Overstrung; combination agraffe; Front AND rear duplex. Tension: 19,000 kg.
Plate - Sturdy gray iron; filled, CNC-milled, and sealed; bronzed and lacquered.
Tuning Pins - Premium steel with rust-resistant, nickeled heads.
Strings - TREBLE: from high-tensile Swedish and American steel. BASS: Swedish steel core wire wound with pure copper.
Hammers - Premium wool top felt over premium wool under felt; treated to resist insects. Compression-wired to retain permanent shape. Hard kotibe moldings. Shanks from select hornbean and maple.
Dampers - Horizontal-cut premium wool for effective dampening. Bubinga heads for endurance.
Action - White, quarter-sawn hornbean parts are bushed with specially treated wool action cloth for freedom from friction. Parts are anchored in hard maple dowels housed in inflexible seamless brass tubing to assure precise & stable regulation. Exclusive single, combination phosphor bronze repetition and fly spring provides constant crisp touch response. Specially designed to respond 14% faster fortissimo and 6% faster pianissimo.
Keys - European spruce, individually weighed-off. Chip-proof, stain-resistant coverings for naturals; slip-proof, delicately abraded ebonized sharps. Tough, durable Linden wood buttons reinforce keys over balance rail permitting maximum tonal power with every strike.
Keybed - Made from planks of stable, quarter-sawn spruce. Horizontal planks are freely mortised together, while their ends are permanently mortised into vertical planks, presenting a vented system for humidity escapement while allowing for necessary expansion and contraction. Front center is crowned contrasting the reverse-crowned action frame for snug fit. This design intensifies key movement and prevents "slapping" during heavy playing. Large beech dowel ends provide a solid mount for adjustable brass touch-regulating screws. Thickness: 1-3/4" (42 mm).
Pedals - Heavy, solid brass. Soft, sustaining, and full sostenuto.

Price: $23,500 USD
Ad #: 36240
Manufacturer: Steinway & Sons
Model: L
Serial #: 476271
Year: 1981
Length: 5'11"
Finish: Satin
Color/Wood: Black
City/State: Englewood, Colorado
Show Map
Posted: 02/09/2019
Views: 1503

Similar Pianos Similar Pianos

Resources Resources View More >